MIG Welding Wire

Spark MIG Welding Wire
mig wireThese are Copper Coated Wires with special chemistry for continuous welding (MIG Welding) of unalloyed steel.
The product is available in a layer wound form and as per the customer's requirement.

Spark MIG Welding Wire offers:
  • Excellent feedability
  • Perfect layer winding in all size for trouble-free feeding with no entanglement
  • Optimum Copper coating for efficient current pick-up and freedom from rusting
  • Excellent copper adherence with minimum flaking
  • Controlled cast and helix
Markets: -
mig welding wireSpark MIG Welding Wire meet the diverse requirements of discerning buyers in:
  • Automobile ancillaries
  • Ship building
  • White Goods industry
  • General Fabrication
  • Railways and other application 

Products Description: -
Size Range: 0.8 mm, 1 mm, 1.2 mm

Size & Tolerance (mm)UTS (kg/mm2)
0.8-0.01-0.04110 min
1.2-0.01-0.0490 min
Packing: -
Normally supplied in virgin plastic spools designed for easy mounting on wire feeding equipment with spool mounting facility of 50mm bore. Spool wrapped in VCI paper and polythene. Sealed in polythene bags with silica get and placed in corrugated paper boxes, which are then shrink wrapped with CDPE. 
Mechanical Properties: -
Testing ParameterTypical Properties of all weld with Co2 as shieldMin. Specified values as per AWS specification
Ultimate tensile strength1.4 -1.85 %51 Kg/mm2
Yield Strength0.80 1.15 %42 Kg/mm2
% Elongation (GL-5d)0.03 % max22% Min
% Reduction in area0.025 % maxN/A
Charpy 'V' Notch Impact6.5 kg at -29c2.8 Kg m at -29c

Coil Specification: -
SizeCoil WeightCoil IDCoil ODCoil TraverseOther Details
0.8mm Layer12.5+/-0.5 Kg20030088Flange Thickness = 7mm
1.0mm Layer15+/-0.5 Kg20030088Cast = 305mm min - 0.80mm
1.20mm Layer15+/-0.5 Kg20030088Cast = 380mm min - 1.20mm
     Helix = 25.4mm max
Effective Utilisation of MIG Welding Wire
  • Ensure that the proper size of contact is being used
  • Ensure that liner of the welding gun is clean and free of copper flakes
  • Ensure that wire feed roller setting is proper, not too loose nor too tight
  • Set optimum welding parameters for the job
  • Ensure recommended flow rate of the shielding gas
  • Clean the welding nozzle periodically to remove splatter
  • Cover the welding spool after use to prevent moisture and dirt pickup